Set Supervisor Password; Password On Boot; Diskette Access - Gigabyte GS-R114V System Installation Manual

Set Supervisor Password

You can install and change this options for the setup menus. Type the password up to 6
characters in lengh and press <Enter>. The password typed now will clear any previously
entered password from the CMOS memory. You will be asked to confirm the entered
password. Type the password again and press <Enter>. You may also press <Esc> to abort
the selection and not enter a specified password or press <Enter> key to disable this option.

Password on boot

Password entering will be required when system on boot.
Requries entering password when system on boot.
Enabled
Disable this function. (Default value)
Disabled
Fixed disk boot sector
Write protects boot sector on harddisk to protect against virus.
Write Protect
Set the fixed disk boot sector at Normal state. (Default value)
Normal

Diskette access

Control access to diskette drives.
Requires user's password to access floppy drives.
User
Requires supervisor's password to access floppy drives. (Default value)
Supervisor
4 7
BIOS Setup