Table of Contents
Advertisement
System installation Guide
Fig-3
3.2. CPU Installation
Lift the ZIF (Zero Insertion Force) socket lever
up 90 degree. Insert CPU into the socket. Make
sure CPU is seated properly, then push the level
back to the original locked position. (Fig-4 and
Fig-5 )
Fig-4
3.3. Heat Sink Installation
Place the heat sink on top of the CPU with the clip
handle on the same side as DIMM slot . Clip one side
(without handle) onto the CPU socket's hook and
gently push the other side of the clip (with handle) on to
the opposite side of the CPU socket's hook. (Fig-6 )
3-2
Fig-5
Advertisement
Table of Contents
