Serial Ata - Gigabyte GS-R114V System Installation Manual

GS-R114V Rack Mount Server
Route Port 80h cycles to
Set route port 80h cycles to either PCI or LPC bus.
PCI
LPC
Parallel ATA
Enabled
Disabled

Serial ATA

Enabled
Disabled
Native Mode Operation
This option allows user to set the native mode for Serial ATA function.
Auto
Serial ATA
SATA Controller Mode Option
Compatible Mode
Enhanced Mode
Note: Pre-Win2000 operating system do not work in Enhanced mode.
SATA AHCI Enable
Enabled
Disabled
Set Route Port 80h I/O cycles to the PCI bus. (Default Value)
Set Route Port 80h I/O cycles to the LPC bus.
Enable Parallel ATA. (Default value)
Disable the device.
Enables on-board serial ATA function. (Default Value)
Disables on-board serial ATA function.
Auto detected. (Default value)
Set Native mode to Serial ATA.
SATA and PATA drives are auto-detected and placed in
Legacy mode. (Default value)
SATA and PATA drives are auto-detected and placed in
Native mode.
Set this item to enable SATA AHCI function for WinXP-SP1+IAA
driver supports AHCI mode.
Disabled this function.
4 0