Step 3-6: Hard Disk Drive Installation - Gigabyte GS-R114V System Installation Manual

GS-R114V Rack Mount Server

Step 3-6: Hard Disk Drive Installation

Step 1 Press the release button and pull the blank out of the drive bay.
Step 2 Remove the plastic hard disk tray.
Step 3 Slide hard disk into blank and secure it with screws.
Step 4 To replace the hard drive blank, slide the blank into the bay until it locks into place. Connect cable
and power.
Step 5 Place the hard disk into the server system.
Step 1
Step 3
Step 2
1 6