Advertisement
3.
Open the latch and close the T-top.
Check to see if there
are any
gaps
showing. Unlatch the T-top and adjust
the sunshade as required.
4. Once the sunshade is installed
properly, you can stick the Velcro@
buttons on the glass for
a
proper fit
every time you install the sunshades.
To
do this, first remove the T-top with
the sunshade installed and place it
upside down on a table or bench. Take
care not to scratch the glass.
remove the backing paper f r o m the
Velcro@ buttons. Push the sunshade
back into place sticking the Velcro@
to
the glass,
6.
Install the T-top, close the latch and
lock the T-top, Repeat the above steps
for the passenger-side sunshade.
5.
Pull the sunshade back
a
little and
You can store the sunshades in their
storage
area
in the rear
of your
vehicle.
You can also leave them attached to the
T-tops. The
T-tops
can still be removed
and placed in their storage slots when the
sunshades are attached.
91
= -
Advertisement
