Advertisement
Features & Controls
Headlight HighLow Beam
To change the headlights from low beam
to high or high to low, pull the turn signal
lever all the way toward you. Then
release it. When the high beams are
on,
this blue light on the instrument panel
also will be on.
.
e * .
5
r
W i n d s m p e r s
You control the windshield wipers by
turning the band with the wiper symbol
on it.
For a single wiping cycle, turn the band
to
MIST.
Hold
it
there until the wipers start,
then let go. The wipers will stop after one
cycle. If you want more cycles, hold the
band on
MIST
longer.
You can set the wiper speed for a long or
short delay between wipes. This can be
very useful in light rain or snow. Turn the
band to choose the delay time. The closer
to LO, the shorter the delay.
For steady wiping at low speed, turn the
band away from you to the
LO
position.
For high speed wiping, turn the band
further, to
HI.
To stop the wipers, move
the band to OFF.
99978
Advertisement
