Advertisement
Seats & Safety Belts
Vehicles first sold in Canada have child
restraint anchor bracket hardware in the
glove box, along with instructions for
installing
it.
This should be used only
with a child restraint, and only to secure a
child restraint at a rear seating position.
An additional anchor bracket for a child
restraint at the other rear seating position
is available at Chevrolet dealerships in
Canada.
Securing a Child Restraint in the Rear
Seat
You'll be using the lap-shoulder belt. See
the earlier section about the top strap if
the child restraint has one.
1. Put the restraint on the seat. Follow
the instructions for the child restraint.
2. Secure the child in the child restraint
as the instructions say.
3.
Pull out the vehicle's safety belt and
run the lap part through or around the
restraint. The child restraint
instructions will show you how. Tilt
the latch plate
to adjust the belt if
needed.
See if the shoulder belt would go in
front of the child's face or neck. If so,
put it behind the child restraint.
Advertisement
