Advertisement
You are now ready to enter your security
code. Don't wait more than 15 seconds
between steps.
5. Press SET and "000" will appear on
the display.
6. Press SCAN and hold until the first
digit of your code appears. Release
the button.
7. Press
SEEK
4 or b and hold until
the second and third digits of your
code appear. Release the button.
8. Press the lower knob and
"000' will
appear. Now you are ready to enter
the last three digits of your code.
9. Press SCAN and hold
until the
fourth digit of your code appears.
Release the button.
10. Press SEEK 4 or b and hold until
the fifth and sixth digits of your code
appear. Release the button.
11.
Press the lower knob. "rEP'
will
appear for five seconds, and then
"000" will
appear.
12. Repeat steps 6 through 11. "SEC"
will appear. This means that your
audio system is secured.
Shutting
O f f
the Theft-Deterrent
Feature
If your audio system is secured ("SEC"
shows on display) and you wish to disable
it, enter your security code as follows,
pausing no more than 15 seconds between
steps:
1. Turn the ignition on. Make sure the
audio system is off. The time will
show
on
the display.
seconds. "SEC" will show on the
display.
display.
2. Press 1 and
4
together for five
3. Press SET. "000" will appear
on
the
Advertisement
