Advertisement
To Set Cruise Control
1. Move the Cruise Control switch to
ON.
A
If you leave your Cruise
Control switch on when you're
not using Cruise, you might hit a
button and go into Cruise when you
don't want to. You could be startled
and even lose control. Keep the
Cruise Control switch OFF until
you want to use
it.
!m
.I
%'
2. Get up to the speed you want.
3.
Push in the set button at the end of the
lever and release it.
To Resume a Set Speed
Suppose you set your Cruise Control at
a desired speed and then you apply the
brake. This, of course, shuts off the
Cruise Control. But you don't need to
reset it. Once you're going about
25
mph
(40 km/h) or more, you can move the
Cruise Control switch from
ON
to
R/A
(Resume/Accelerate) for about half
a second.
You'll go right back up to your chosen
speed and stay there.
Advertisement
