Advertisement
Service & Appearance Care
if outside temperatures are
50°F (10°C)
or more. If it's colder than
50°F
(lO°C),
you may have
to
idle the engine longer.
A hot check must follow when fluid is
added during a cold check.
To check the fluid hot or cold:
0
Park your vehicle
on
a level place.
Place the shift lever in
P
(Park) with
0
With your foot on the brake pedal,
the parking brake applied.
move the shift lever through each gear
range, pausing for about three seconds
in
each range. Then, position the shift
lever in
P
(Park).
minutes or more.
0
Let the engine run at idle for three
234
A
3 . 4 L L32
(Code
S)
Then, without shutting off the engine,
follow these steps:
1. Pull out the dipstick and wipe it with a
clean rag or paper towel.
3
2
5.7L
LTl (Code
P)
!. Push it back in all the way, wait three
seconds and then pull it back
out
again.
Advertisement
