Advertisement
Service & Appearance Care
~1
NOTICE:
I
l
l
Then, follow these steps:
100
mucn or too mtIe nula can
damage your transmission.
Too
much can mean that some of the
fluid could come out and fall on
hn
engine parts, starting a fire. Be
s
to get an accurate reading if you
check your transmission fluid
1. Remove the filler plug.
2. Check that the lubricant level is up to
the bottom of the filler plug hole.
11
3. If
the fluid level is good, install the
plug and be sure
it
is fully seated. If
the fluid level is low, add more fluid
as
described in the next steps.
II
Check the fluid level only when your
engine is off, the vehicle is parked on a
level place and the transmission is cool
enough for you to rest your fingers
on
the
transmission case.
How to Add Fluid:
Here's how to add fluid. Refer to the
Maintenance Schedule to determine what
kind of fluid to use. See "Recommended
Fluids and Lubricants" in the Index.
1. Remove the filler plug.
2. Add fluid at the filler plug hole. Add
only enough fluid to bring the fluid
level up to the bottom of the filler
plug hole.
3.
Install the filler plug. Be sure the plug
is fully seated.
...
236
Advertisement
