Download Print this page
Intel AXX25DRVADPTR Installation Manual
Intel AXX25DRVADPTR Installation Manual

Intel AXX25DRVADPTR Installation Manual

2.5'' hard drive carrier kit for intel server chassis/system

Advertisement

Quick Links

2.5'' Hard Drive Carrier Kit Installation
Guide for Intel
Order Number: E78220-002
This document provides instructions for installing the following accessory kits:
AXX25DRVADPTR
Information in this document is provided in connection with Intel
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's
Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any
express or implied warranty, relating to sale and/or use of Intel
fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property
right. Intel products are not designed, intended or authorized for use in any medical, life saving, or life sustaining
applications or for any other application in which the failure of the Intel product could create a situation where
personal injury or death may occur. Intel may make changes to specifications and product descriptions at any time,
without notice.
®
Intel
server boards contain a number of high-density VLSI and power delivery components that need adequate
airflow for cooling. Intel's own chassis are designed and tested to meet the intended thermal requirements of these
components when the fully integrated system is used together. It is the responsibility of the system integrator that
chooses not to use Intel developed server building blocks to consult vendor datasheets and operating parameters to
determine the amount of airflow required for their specific application and environmental conditions. Intel
Corporation can not be held responsible if components fail or the server board does not operate correctly when used
outside any of their published operating or non-operating limits.
Intel, Intel Pentium, and Intel Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in
the United States and other countries.
* Other names and brands may be claimed as the property of others.
Copyright © 2009, Intel Corporation. All Rights Reserved
®
Server Chassis/System
®
products. No license, express or implied, by
®
products including liability or warranties relating to
E78220-002

Advertisement

loading
Need help?

Need help?

Do you have a question about the AXX25DRVADPTR and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Intel AXX25DRVADPTR

  • Page 1 Intel products are not designed, intended or authorized for use in any medical, life saving, or life sustaining applications or for any other application in which the failure of the Intel product could create a situation where personal injury or death may occur.
  • Page 2 Safety Information Important Safety Instructions Read all caution and safety statements in this document before performing any of the instructions. See also Intel Server Boards and Server Chassis Safety Information on the ® Intel Server Deployment Toolkit CD and/or at http://support.intel.com/support/motherboards/server/sb/cs-010770.htm.
  • Page 3 Take care to grip with, but not squeeze, the pliers or other tool you use to remove a jumper, or you may bend or break the pins on the board. ® 2.5" Hard Drive Carrier Kit Installation Guide for Intel Server Chassis/System...
  • Page 4 2.5” Hard Drive Carrier Installation Instruction ................ 2 Remove the Hard Drive Bracket ..................... 2 Install 2.5” Hard Drive into the Bracket ................... 3 Install Hard Drive Bracket into Carrier..................4 ® 2.5" Hard Drive Carrier Kit Installation Guide for Intel Server Chassis/System...
  • Page 5 Figure 4. Securing screws on the bracket................3 Figure 5. Installing the bracket into the rail ................4 Figure 6. Securing Screws on the Rails .................. 4 Figure 7. Left view after Installation ..................4 ® 2.5" Hard Drive Carrier Kit Installation Guide for Intel Server Chassis/System...
  • Page 7 About the 2.5” Hard Drive Carrier Kit Use the instructions in this 2.5” Hard Drive Carrier Kit Installation Guide to assemble a 2.5” hard drive into the carrier kit and then install into a 3.5” hard drive hot swap bay in the Intel ®...
  • Page 8 3. Pay attention to the standoff on left back of the bracket. Push left rail outward and get the hard drive bracket up away from carrier. Figure 2. Removing the Bracket from Carrier ® 2.5" Hard Drive Carrier Kit Installation Guide for Intel Server Chassis/System...
  • Page 9 Figure 3. Installing 2.5” HDD into the bracket 2. Secure the screws on the right and left side of the bracket(4 M3 screws) Figure 4. Securing screws on the bracket ® 2.5" Hard Drive Carrier Kit Installation Guide for Intel Server Chassis/System...
  • Page 10 Figure 5. Installing the bracket into the rail 2. Secure the screws on the right and left rail of hard drive carrier. Figure 6. Securing Screws on the Rails Figure 7. Left view after Installation ® 2.5" Hard Drive Carrier Kit Installation Guide for Intel Server Chassis/System...