Draper FlexShade UpLift Instructions Manual
Draper FlexShade UpLift Instructions Manual

Draper FlexShade UpLift Instructions Manual

Cordless operated manual shade with available fascia

Advertisement

Quick Links

FlexShade
UpLift
®
Cordless operated manual shade with available fascia

Overview - Components

FLSHADE UPLIFT
Please Note:
Your UpLift FlexShade operator has
been pre-rotated to optimize spring
tension. See roller label for number of
pre-rotations. If shade tension requires
additional adjustment, see Page 7.
O P E
E N D
E N D
( O p t
C A P
i o n a
C O V
E R
( O p t
i o n a
l )
IMPORTANT:
Orange Retaining
Clip must be
removed from shade
prior to operation.
Read and understand all warnings
Contents
Overview - Components .......................................................................................1
Section 1 - Installing Mounting Brackets or Endcaps ....................................3
Section 3 - Surface Headbox Installation Option ............................................5
U N I
V E R
M O
S A L
U N T
B R A
I N G
C K E
T
R A T
O R
C A P
l )
CAUTION
before beginning installation.
(Page 2 of this document)
Section 4 - Fascia Installation Option ................................................................6
Section 5 - Shade Operation ...............................................................................7
Section 6 - Adjusting Shade Tension .................................................................7
Section 7 - Hardware Dimensions ......................................................................8
Section 8 - Overall Dimensions ...........................................................................8
INSTRUCTIONS
INSTALLATION & OPERATION
E N D
C A P
C O V
I D L
E R
E R
U N I
( O p t
( O p t
E N D
V E R
i o n a
M O
C A P
l )
S A L
U N T
( s m
I N G
a l l a
n d l
B R A
a r g e
C K E
s i z e
T
s a v
a i l a b
l e )
TOOLS REQUIRED
PENCIL
LEVEL
POWER DRILL
If you have any difficulties installing or servicing your
FlexShade UpLift, call your dealer or Draper, Inc.
Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385
draperinc.com | 765.987.7999 | 800.238.7999
|
FORM: FS_Uplift_Inst25
© 2025 All Rights Reserved
i o n a
l )
TAPE MEASURE
HARDWARE
(by others)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FlexShade UpLift and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Draper FlexShade UpLift

  • Page 1: Table Of Contents

    Section 3 - Surface Headbox Installation Option ..........5 If you have any difficulties installing or servicing your FlexShade UpLift, call your dealer or Draper, Inc. Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385 draperinc.com | 765.987.7999 | 800.238.7999 FORM: FS_Uplift_Inst25...
  • Page 2: Please Read - Important Safety & Installation Information

    Most standard Draper fabrics may be cleaned at the window by vacuuming with a soft brush attachment. They also may be cleaned by using a sponge or soft cloth and mild solution of warm soapy If the shade is telescoping, place a piece of shimming water.
  • Page 3: Section 1 - Installing Mounting Brackets Or Endcaps

    Please Note: Installer is responsible for selecting mounting hardware appropriate for site conditions. WARNING: UpLift operator should not be used with products or pockets having a bottom closure without written permission from Draper. UNIVERSAL MOUNTING BRACKETS INSTALLATION Mark wall, jamb, or...
  • Page 4: Section 2 - Endcap Or Bracket-Only Shade Installation Option

    FlexShade UpLift ® page 4 of 8 Section 2 - Endcap or Bracket-Only Shade Installation Option (Small or Large Bracket or Endcap Hardware) Place spring-loaded pin Please Note: into idler end of the ALWAYS START AT THE bracket or endcap. IDLER END OF SHADE.
  • Page 5: Section 3 - Surface Headbox Installation Option

    FlexShade UpLift ® page 5 of 8 Section 3 - Surface Headbox Installation Option (Small or Large Endcap Hardware ONLY.) Please Note: Installer must provide adequate clearance for removal of Roller Assembly during installation and maintenance. Please Note: Headbox MUST BE mounted directly to ceiling or wall, or to a continuous blocking that has been secured to building structure.
  • Page 6: Section 4 - Fascia Installation Option

    FlexShade UpLift ® page 6 of 8 Section 4 - Fascia Installation Option (Small or Large Endcap Hardware ONLY.) Please Note: - Endcaps must be installed the correct - Fascia is not fully seated - Once in place, check for secure fit. until it clicks into place on If not secure, use an appropriate distance apart for fascia to be properly...
  • Page 7: Section 5 - Shade Operation

    FlexShade UpLift ® page 7 of 8 Section 5 - Shade Operation To lower window shade To raise window shade (Large Endcap Hardware shown.) (Universal Bracket Hardware shown.) Grasp center of hem bar, Place hand under center of or hem bar clip. hem bar or hem bar clip.
  • Page 8: Section 7 - Hardware Dimensions

    FlexShade UpLift ® page 8 of 8 Section 7 - Hardware Dimensions Small Endcap Large Endcap 3 " 83mm 2" 51mm 4 " 114mm 3 " 86mm 2 " 2 " 3 " 4 " 70mm 57mm 98mm 114mm Small Universal Bracket Large Universal Bracket 40mm 56mm...

Table of Contents