Draper FlexShade NEXD Instructions Manual
  1. Manuals
  2. Brands
  3. Draper Manuals
  4. Window Blinds
  5. FlexShade NEXD
  6. Instructions manual
Draper FlexShade NEXD Instructions Manual

Draper FlexShade NEXD Instructions Manual

Hide thumbs Also See for FlexShade NEXD:
Table of Contents

Advertisement

Quick Links

Download this manual
Dual Roller FlexShade
Premium, clutch-operated, dual roller window shade
Overview - Components
(Extra Large Hardware Shown)
FLEXSHADE DFXD
I D L
E N D
E R
C A P
E N D
C A P
C O V
E R
PLEASE READ - Important Installation Information
Caution:
1. Inspect all boxes to make sure you have
received the proper shades and parts.
Controls may be shipped separately, or in
same carton as shades.
2. Open cartons lengthwise, taking care not
to cut into cardboard shipping container.
Contents
PLEASE READ - Important Installation Information ................................................1
PLEASE READ - Safety Information ............................................................................2
Section 1 - Mounting Endcaps ....................................................................................3
Section 2 - Pocket Headbox Installation ...................................................................4
Section 3 - Dual Roller Surface Headbox Installation ............................................5
NEXD
®
3. Before mounting shades, verify measurements
on label provided with shade, and ensure unit
is installed at correct width.
4. All endcaps, fascia, headboxes, and other
hardware must be installed level. Shades
must be level and square.
..................................................1
...........................................6
INSTALLATION & OPERATION
E N D
C A P
C O V
E R
C L U
T C H
E N D
C A P
B e a
d
C h a
i n s
P - C
l i p s
S p r
i n g
C h a
- L o
i n T
D e v
a d e
e n s
i c e
d
s
i o n
( o p
t i o n
a l )
TOOLS REQUIRED
PENCIL
TAPE MEASURE
5. Read the following installation guidelines
thoroughly and follow them carefully.
Failure to do so may cause product to fall or
otherwise fail, and invalidates warranty.
6. Installer is responsible for selecting mounting
hardware appropriate for site conditions.
Section 6 - Attaching Fascia .......................................................................................8
Section 8 - Dimensions: Standard Hardware ...........................................................9
If you have any difficulties installing or servicing your
Dual Roller FlexShade
Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385
draperinc.com | 765.987.7999 | 800.238.7999
© 2021 All Rights Reserved
INSTRUCTIONS
CAUTION
Read and understand
all warnings before
beginning installation.
LEVEL
POWER DRILL
HARDWARE
PLIERS
HEX WRENCH
SCREWDRIVER
...................7
NEXD, call your dealer or Draper, Inc.
®
|
FORM: FS_NEXD_Dual_Roller_Inst21
(by others)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FlexShade NEXD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Draper FlexShade NEXD

Summary of Contents for Draper FlexShade NEXD

  • Page 1: Table Of Contents

    If you have any difficulties installing or servicing your Dual Roller FlexShade NEXD, call your dealer or Draper, Inc. ® Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385 draperinc.com | 765.987.7999 | 800.238.7999 FORM: FS_NEXD_Dual_Roller_Inst21 © 2021 All Rights Reserved...

  • Page 2: Please Read - Safety Information

    Most standard Draper fabrics may be cleaned at the window by vacuuming with a soft brush attachment. They also may be cleaned by using a sponge or soft cloth and mild solution of warm soapy If the shade is telescoping, place a piece of high water.

  • Page 3: Section 1 - Mounting Endcaps

    Dual Roller FlexShade NEXD ® page 3 of 12 Section 1 - Mounting Endcaps Please Note: If installing Pocket Headbox or Surface Headbox, please install headbox FIRST (Section 2, Section 3) Caution: Before mounting shades, verify measurements on label provided with shade, and ensure unit is installed at correct width. Please Note: Installer is responsible for selecting mounting hardware appropriate for site conditions.

  • Page 4: Section 2 - Pocket Headbox Installation

    Dual Roller FlexShade NEXD ® page 4 of 12 Section 2 - Pocket Headbox Installation Figure 3-A PLEASE NOTE: Installer must provide adequate clearance for removal of Roller Assembly during installation and maintenance. PLEASE NOTE: Headbox must be mounted directly to ceiling, or to a continuous blocking that is secured to building structure.

  • Page 5: Section 3 - Dual Roller Surface Headbox Installation

    Dual Roller FlexShade NEXD ® page 5 of 12 Section 3 - Dual Roller Surface Headbox Installation Figure 4-A Figure 4-B Place endcaps into top/back cover piece of ceiling/wall headbox. Drill holes in back or top (wall mount) of top/ (ceiling mount) back cover piece.

  • Page 6: Section 4 - Spring Assist Idler

    Caution: Do not allow shade roller to become exposed by running shade fabric too far down. Use stop balls provided in Please Note: If shade fabric is hardware packet by Draper to set up and down travel limits. Stop balls by others may be too small, and become lodged ®...

  • Page 7: Section 5 - Shade Fabric Roller Mounting

    Caution: Do not allow shade roller to become exposed by lowering shade fabric too far. Please Note: If shade fabric is tracking to one side, see Be sure to use stop balls provided by Draper to set up and down travel limits. Stop balls "Field Adjustments,"...

  • Page 8: Section 6 - Attaching Fascia

    Spring-Loaded Cord Tension Device Figure 7-A Figure 7-B If Draper Clutch FlexShade complies with WMCA/ANSI Standard A100.1-2018, a Spring-Loaded Cord Tension Device Chain Tension Device comes installed on bead chain . An approved permanent warning label and approved mechanical fasteners (Fig.

  • Page 9: Section 8 - Dimensions: Standard Hardware

    Dual Roller FlexShade NEXD ® page 9 of 12 Section 8 - Dimensions: Standard Hardware Standard Dual Fascia Standard Dual Surface Headbox " " (22mm) (22mm) " " (67mm) (67mm) 3 " 3 " (87mm) (87mm) 5 " 5 " (129mm) (130mm) MAXIMUM...

  • Page 10: Section 9 - Dimensions: Large Hardware, Surface Headbox

    Dual Roller FlexShade NEXD ® page 10 of 12 Section 9 - Dimensions: Large Hardware, Surface Headbox Extra Large Dual Fascia Extra Large Dual Surface Headbox 7 " 7 " (200mm) (200mm) 7 " " (200mm) (202mm) 2 " 2 " (57mm) (57mm) MAX.

  • Page 11: Section 10 - Dimensions: Standard Hardware, Pocket Headbox

    Dual Roller FlexShade NEXD ® page 11 of 12 Section 10 - Dimensions: Standard Hardware, Pocket Headbox 5 " (146mm) 2 " " CONTINUOUS BLOCKING (64mm) (22mm) BY OTHERS " MAXIMUM (83.3mm) BUNDLE DIAMETER " (49mm) " MAXIMUM (65.8mm) BUNDLE DIAMETER 3 "...

  • Page 12: Section 11 - Dimensions: Extra Large Hardware, Pocket Headbox

    Dual Roller FlexShade NEXD ® page 12 of 12 Section 11 - Dimensions: Extra Large Hardware, Pocket Headbox " (221mm) CONTINUOUS BLOCKING BY OTHERS 7 " (197mm) CONTINUOUS BLOCKING " BY OTHERS (21mm) CEILING 1 " 1 " " BY OTHERS (38mm) (41mm) (17mm)

Table of Contents