Dhcp; Staticip; Staticroute - Cisco ATA-186 Administrator's Manual

Chapter 5 Parameters and Defaults
•
•

DHCP

Description
A DHCP server can be used to automatically set the Cisco ATA IP address, the network route IP address,
the subnet mask, DNS, NTP, TFTP, and other parameters.
•
•
Value Type
Boolean
Range
0 or 1
Default
1
Voice Configuration Menu Access Code
20

StaticIp

Description
Use this parameter to statically assign the Cisco ATA IP address if the DHCP parameter is set to 0.
Value Type
IP address
Default
0.0.0.0
Voice Configuration Menu Access Code
1

StaticRoute

Description
Use this parameter to statically assign the Cisco ATA route if the DHCP parameter is set to 0.
Value Type
IP address
OL-3410-01
StaticRoute, page 5-7
StaticNetMask, page 5-8
1—Enable DHCP
0—Disable DHCP
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SIP)
Network Parameters
5-7