Complete Reference Table Of All Cisco Ata Sip Services - Cisco ATA-186 Administrator's Manual

Complete Reference Table of all Cisco ATA SIP Services

Placing an IP Call
To place an IP call, dial the telephone number and the IP address of the remote user agent. The dial
format is shown below:
Dial Format
<phone number>**<ipaddress>#
Use the star (*) key on the telephone keypad to represent the dot (.) in an IP address. Use the pound (#)
key on the telephone keypad to terminate the dial string and place the call.
URL dialing is not supported.
Note
Example
To place a call to a user agent with an ID of 408-555-1212 at IP address 192.168.1.100, you would enter
the following string on your telephone keypad:
4085551212**192*168*1*100#
Complete Reference Table of all Cisco ATA SIP Services
Table 4-3
includes links to the detailed descriptions of the parameters used for configuring these features.
Table 4-3
Configurable Feature
802.1Q packet tagging
Audio compression and decompression
Backup proxy configuration
Backup proxy timeout
Call forward enable/disable
Call forwarding—Maximum times allowed
Call commands
Call features
Caller ID format
Call waiting
Call-waiting call ring timeout
Call-waiting state specified
Cisco Discovery Protocol
CNG tone detection
Configuration update interval
Debug messages—configuring host
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SIP)
4-12
is a reference table that lists all configurable features for the Cisco ATA (using SIP), and
Configurable Features and Related Parameters
Chapter 4 Basic and Additional SIP Services
Related Parameter
VLANSetting, page 5-35
LBRCodec, page 5-20
AltGk, page 5-13
AltGkTimeOut, page 5-13
ConnectMode, page 5-28
MAXRedirect, page 5-15
CallCmd, page 5-47, Chapter 6, "Call
Commands"
CallFeatures, page 5-23
CallerIdMethod, page 5-25
SigTimer, page 5-32
FeatureTimer, page 5-26
ConnectMode, page 5-28
OpFlags, page 5-34
AudioMode, page 5-20
CfgInterval, page 5-5
NPrintf, page 5-36
OL-3410-01