Cisco ATA-186 Administrator's Manual page 131

Chapter 6 Call Commands
Table 6-4 Call Command Behavior (continued)
Cisco ATA State and its Definition
CALLING_HOLDING: Cisco ATA is
waiting for a second far end to respond
while placing a connected call on hold
WAITHOOK_HOLDING: The AFE
hangs-up to disconnect the current call
while there is a WFE being put on hold
AITHOOK_ALERTING: The AFE hangs
up while a waiting call alerts
OL-3410-01
Summary of Commands (Input Sequence and Actions)
R—Cancel the call and revert to PREDIAL_HOLDING state.
•
ONH—Cancel the call and transfer the waiting party to the callee, and revert
•
back to PREDIAL state.
R—Retrieve the WFE and go to CONNECTED state.
•
R—Stop CWT, answer the waiting call, and go to CONNECTED state.
•
WFE: Cancel the call; stop CWT, go to WAITHOOK state.
•
ONH—Go to IDLE state (in which Cisco ATA automatically starts ringing
•
the phone, and goes to RINGING state).
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SIP)
Call Command Behavior
6-11