Supplementary Services; Installation And Configuration Overview - Cisco ATA-186 Administrator's Manual

Installation and Configuration Overview

•
•
•

Supplementary Services

SIP supplementary services are services that you can use to enhance your telephone service. For
information on how to enable and subscribe to these services, see the
page 5-23
For information on how to use these services, see
The following list contains the SIP supplementary services that the Cisco ATA supports:
•
•
•
•
•
•
•
•
•
•
Installation and Configuration Overview
Table 1-1
in a typical SIP environment where a large number of Cisco ATAs must be deployed.
Table 1-1 Overview of the Steps Required to Install and Configure the Cisco ATA and Make it Operational
Action
1. Plan the network and Cisco ATA configuration.
Install the Ethernet connection.
2.
Install and configure the other network devices.
3.
Install the Cisco ATA but do not power up the Cisco ATA yet.
4.
5. Download the desired Cisco ATA release software zip file from
the Cisco web site, then configure the Cisco ATA.
6. Power up the Cisco ATA.
Periodically, you can upgrade the Cisco ATA to a new signaling
7.
image by using the TFTP server-upgrade method or the
manual-upgrade method.
Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator's Guide (SIP)
1-10
NOTIFY
OPTIONS
ACK
and the "PaidFeatures" section on page
Caller ID
Call-waiting caller ID
Voice mail indication
Making a conference call
Call waiting
Call forwarding
Call return
Calling-line identification
Unattended transfer
Attended transfer
provides the basic steps required to install and configure the Cisco ATA to make it operational
Chapter 1 Cisco Analog Telephone Adaptor Overview
"CallFeatures" section on
5-24.
Appendix A, "Using SIP Supplementary Services."
Reference
What the Cisco ATA Package Includes, page 2-2
Chapter 3, "Configuring the Cisco ATA for SIP"
Chapter 8, "Upgrading the Cisco ATA Signaling
Image"
OL-3410-01