Ending A Call; Using Hold And Resume - Cisco 7921G - Unified Wireless IP Phone VoIP Phone Manual

Ending a Call

To end a call, simply disconnect. Here are some more details.
If you want to...
End the call
Disconnect one call but preserve
another call on the same line

Using Hold and Resume

You can hold and resume calls. When you put a call on hold, the Hold icon
caller ID in the call view.
If you want to...
Put a call on hold
Remove a call from
hold on the current line
Remove a call from
hold on a different line
Move a call on a shared
line to your wireless
phone or to your desk
phone
Cisco Unified Wireless IP Phone 7921G for Cisco Unified CallManager 4.1, 4.2, 5.0 and Later
Then...
Choose
Choose EndCall or Options > EndCall. If necessary, remove
the call from hold first.
Then...
1. Make sure the call you want to put on hold is highlighted.
2. Press Hold.
Engaging the Hold feature typically generates music or a beeping
Note
tone.
1. Make sure the appropriate call is highlighted.
2. Press Resume.
1. Press (Line View) to change to another line.
2. Press Resume.
Note If a single call is holding on this line, the call automatically resumes. If
another call is holding, scroll to the appropriate call and press Resume.
1. From the phone with the active call on the shared line, press Hold.
2. From your other phone with the shared line, press Resume.
(red button), EndCall, or Options > EndCall.
Basic Call Handling
appears next to the
29