Using Cisco Webdialer - Cisco 7921G - Unified Wireless IP Phone VoIP Phone Manual

Tip
You cannot change the Ring Settings for the Cisco Unified Wireless IP Phone 7921G from the User
Options web pages.

Using Cisco WebDialer

Cisco WebDialer allows you to make calls on your wireless IP phone to directory contacts by clicking
items in a web browser. Your system administrator must configure this feature for you.
If you want to...
Use WebDialer with
your User Options
directory
Use WebDialer with
another online
corporate directory
(not your User
Options directory)
Log out of WebDialer Click the logout icon in the Make Call or Hang Up page.
Cisco Unified Wireless IP Phone 7921G for Cisco Unified CallManager 4.1, 4.2, 5.0 and Later
Then...
1. Log in to your User Options web pages. See
Web Pages, page
2. Choose User Options > Directory and search for a coworker.
3. Click the number that you want to dial.
4. If this is your first time using WebDialer, set up preferences and click
Submit. (See the last row in this table for details.)
5. If the Make Call page appears, click Dial. (See the last row in this table
to learn how to suppress this page in the future, if desired.)
The call is now placed on your phone.
6. To end a call, click Hangup or disconnect from your phone.
1. Log in to a WebDialer-enabled corporate directory and search for
coworkers.
2. Click the number that you want to dial.
3. When prompted, enter your user ID and password.
4. If this is your first time using WebDialer, set up preferences and click
Submit. (See the last row in this table for details.)
5. If the Make Call page appears, click Dial. (See the last row in this table
to learn how to suppress this page in the future, if desired.)
The call is now placed on your phone.
6. To end a call, click Hangup or disconnect from your phone.
Accessing Your User Options Web Pages
62.
Accessing Your User Options
71