Securing The Blanking Plate - Compaq 157770-001 - DAT Drive 20/40 Tape User Manual
Storageworks dat sas tape drives
Hide thumbs
Also See for 157770-001 - DAT Drive 20/40 Tape:
- Getting started manual (40 pages) ,
- Release note (4 pages) ,
- Start here (2 pages)
Table of Contents
Advertisement
7.
Make sure the blanking plate is secure on the rear panel and replace the cover on the server.
Figure 33 Securing the blanking plate
.
IMPORTANT:
On some servers, even those with latch-mounted arrangements, it is necessary to use the
supplied screw to secure the blanking plate.
8.
Connect the other end of the SAS cable (threaded through the blanking plate to the outside of
the server) to the connector on the rear of the tape drive.
DAT SAS Tape Drives
53
Advertisement
Table of Contents
Troubleshooting
