Vertiv Cybex SCMV Installer/User Manual page 12

Vertiv Cybex™ SCMV Secure Desktop MultiViewer Switch Installer/User Guide
2. Press and hold the right mouse button and move the mouse to resize the windows as desired.
NOTE: Window resizing is affected by the Auto Scaling Video Setting (See
2.2.4 User mode
User mode is used to interact with the selected computer.
To enter User mode:
Enter L-CTRL | L-CTRL | u
-or-
Press the scroll wheel or the mouse side button. For more information, see
In User mode, the large blue cursor disappears and the mouse functions in the selected computer until switched to another
computer.
2.3 Cursor Navigation Switching
By default, the switch allows you to move between windows when pressing the left CTRL key and moving the mouse moves
across a window border. This is called Cursor Navigation Switching (CNS). When CNS switches from one computer to another,
the keyboard, mouse, audio and DPP mapping switch accordingly.
Alternatively, you can configure the switch to confine mouse cursor movement to the active window. With this method, you
must use Admin mode or the front panel buttons to switch focus between the computer windows.
NOTE: See Presets
To enable CNS:
Press L-CTRL | L-CTRL | F11 | c.
To disable CNS:
Press L-CTRL | L-CTRL | F11 | b.
2.4 Channel Selection
The numbered LED buttons are each mapped to a corresponding computer port on the back panel. For example, the LED one
button is mapped to the computer connected to computer input one.
NOTE: The buttons have multicolored LED to enhance situational awareness for which computer is active.
You can select which computer to operate using the front panel push buttons. The LED number illuminates to indicate which
computer is currently selected. When you select a new computer, the mapping for the keyboard, mouse, audio and USB
device also changes to the specified computer.
To select a computer:
Press and hold the left CTRL key and move the mouse to the desired window (CNS.)
-or-
Enable Admin mode, use the mouse to select the desired window, and enable User mode.
-or-
Press buttons 1-16 on the front panel or optional AFP remote control panel.
8
on page 14 for predefined display layouts.
Auto Scaling on page 21.)
Admin Mode Mouse Switching on page 26
2 Basic Operation