Okolab LEO 2.0 Technical Notes

RECOMMENDED
DEVICE SETUP
IN LEO 2.0
FOR GAS
MEASUREMENT
PRECAUTIONS:
• Please be cautious with your cultured embryos, considering that during
the measurement procedure the composition of the gas in the chamber
may be affected.
• Read the manuals for the incubator and LEO 2.0 for usage and safety
details.
STEP 1
Connect TUBE-A to LEO 2.0's
HERACELL
HERACELL
TUBE-A
TUBE-B
IN
port and to the Moisure Trap, and TUBE-B from Moisture Trap to the
gas Sample out port.
gas Sample out port
MOISTURE
TRAP
TECHNICAL NOTE
LEO 2.0 gas measurement
in HERACELL
N2
Evaluate the need for chamber cleaning and disinfection
after working on the incubator.
As good practice, it is recommended to have LEO 2.0
charged before use, and not to charge it during use.
Always read the manual of the devices.
If LEO 2.0 shows a message that it's warming up, it is
advised to complete the warm up period before using.
For Time Logging Measurement remove the Trap Top Lid.
1 2
incubators
CO2
%
O2
%
3