Okolab LEO 2.0 Quick Instructions

BASIC MODE
PRELIMINARY OPERATIONS
SET DATE & TIME
Navigate to Switch to Advanced
Mode > Settings > System
> Date & Time
Accessible upon device
startup.
Quickly measure CO2/O2 % in
1
sampled gas without the need
of selecting device or storing
the data.
Gas measured via Diffusion or
2
Pump Mode.
Refer to Gas Connections
section for proper tube
connections.
for Advanced Mode
Navigate to Settings
ADD DEVICE
QUICK INSTRUCTIONS
HAND HELD METER
Welcome to LEO 2.0!
Explore its precision CO2-O2
measurement and user-friendly interface.
This guide ensures a seamless experience
in your laboratory tasks.
∙ Explore LEO 2.0's features for
efficiency.
∙ Accurate gas composition
measurement with CO2-O2-MODULE.
∙ Factory calibrated sensor modules for
reliability.
∙ Two operation modes for versatile
sampling.
ADVANCED MODE
> Device > Add
LEO 2.0
Accessible upon mode
selection.
Perform detailed
1
measurements, analysis, and
data storage for each incubator
(device).
Set device parameters and
2
measuring modes tailored to
specific requirements.
Execute sensors zero reset for
3
precise and accurate readings.
∙ Insert a Name (max 10 characters).
∙ Select measurement parameters:
Auto (stable value), Manual (user
stop), Time (pre-defined duration).
CUSTOMIZABLE SETTINGS:
∙ Pump Mode or Diffusion mode.
∙ Humid: Insert the temperature and
humidity setpoints of the incubator.
∙ Gas return: Enable if sending gas
back into incubator.
∙ Tube Purge: Recommended for Gas
return, helps incubator recover gas
concentration changes.