If Restore Fails - Freecom USB DAT-40ES User Manual

4.
The LEDs will flash in OBDR mode (as described in step 2) while the tape drive restores your
operating system to a state where it can run a normal data restore.
5. Once the operating system has been set up and rebooted, the Tape LED display on the tape drive
changes to constant green and you can remove the backup cartridge, if you wish. You are now
ready to run a normal data restore. Follow the normal process for your restore application.

If restore fails

If the restore fails for any reason, refer to our World Wide Web site (http://www.hp.com/go/obdr)
and do a search on OBDR for detailed troubleshooting information.
DAT USB Tape Drives 47