To Check Whether Your Server Has An Internal Usb Port; Orientation Of Internal 4-Pin Connector (Older Style Pin Layout) - Freecom USB DAT-40ES User Manual

Dat usb tape drives

Table of Contents

To check whether your server has an internal USB port:

•

Look at the diagram on the inside of the side panel of the server to establish whether the server

has an internal USB port and its location. The internal USB port may have a 4-pin or a standard

USB connector.

•

Many ProLiant servers have a 4-pin USB connector on the system board, which may be orientated

vertically or horizontally.

Figure 8 Orientation of internal 4-pin connector (older style pin layout)

Installing an internal DAT tape drive

Table of Contents

Do you have a question about the USB DAT-40ES and is the answer not in the manual?

Storageworks