Hama Classic 00176927 Manual
![]()
Controls and Displays
![Hama - Classic - Controls and Displays Controls and Displays]()
- Battery compartment cover
- Setting wheel (for setting the time)
- Setting wheel (for setting the alarm time)
- Sliding switch (for enabling/disabling the alarm function)
- Light button
Take your time and read the following instructions and information completely. Please keep these instructions in a safe place for future reference. If you sell the device, please pass these operating instructions on to the new owner.
Package contents
- Alarm clock
- 1 x AA battery
- These operating instructions
Getting started and operation
Starting up the clock
Open the battery compartment cover (1), insert one AA battery, ensuring that the battery is inserted correctly in terms of polarity, and then close the battery compartment cover (1). The clock is ready for operation.
Operation
Setting the time
- Turn the setting wheel
(2) on the back in the direction indicated by the arrow to set the current time (hours/minutes). - To set the seconds, remove the battery to stop the seconds. Put the battery back in to start the seconds hand again at the right second.
Alarm clock
- Move the setting wheel
(3) on the back of the alarm clock in the direction of the arrow to set the appropriate alarm time. The hand for the alarm time moves in an anticlockwise direction. - Pull the sliding switch (4) on the back outward or up to enable the alarm. An alarm will sound at the set alarm time.
- Press the sliding switch (4) down to shut off and disable the alarm.
LED lighting
Press the Light button (5) to activate the LED lighting.
Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents. Make sure that water does not get into the product.
Service and Support
Please contact Hama Product Consulting if you have any questions about this product. Hotline: +49 9091 502-115 (German/English)
Further support information can be found here: www.hama.com
Technical Data
| "Classic" alarm clock |
Power supply | 1.5 V 1 x AA battery |
Safety Instructions
Explanation of Warning Symbols and Notes
![]()
This symbol is used to indicate safety instructions or to draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
- The product is intended for private, non-commercial use only.
- Protect the product from dirt, moisture and overheating, and only use it in a dry environment.
- Do not use the product in areas where the use of electronic devices is not permitted.
- Do not drop the product and do not expose it to any major shocks.
- Do not attempt to service or repair the product yourself. Leave any and all service work to qualified experts.
- Do not modify the product in any way. Doing so voids the warranty.
- Keep the packaging material out of the reach of children due to the risk of suffocation.
- Dispose of packaging material immediately according to locally applicable regulations.
![]()
Batteries
- Immediately remove and dispose of dead batteries from the product.
- Only use batteries (or rechargeable batteries) that match the specified type.
- When inserting batteries, note the correct polarity (+ and - markings) and insert the batteries accordingly. Failure to do so could result in the batteries leaking or exploding.
- Do not charge batteries.
- Keep batteries out of the reach of children.
- Do not short circuit the batteries/rechargeable batteries and keep them away from uncoated metal objects.
Documents / Resources
References
Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Hama Classic 00176927 Manual
Need help?
Do you have a question about the Classic and is the answer not in the manual?
Questions and answers