Hama Nostalgie - Alarm Clock Operating Manual

Startup and Operation

Remove the contact breaker on the rear to activate the clock. The alarm clock starts up automatically.

Setting the time

• Use the setting wheel on the back of the alarm clock to set the time (hours/minutes).
• To set the seconds, remove the battery to stop the seconds. Put the battery back in to start the seconds hand again at the right second.

Setting the alarm

• Move the setting wheel on the back of the alarm clock in the direction of the arrow to set the appropriate alarm time. The hand for the alarm time moves in an anticlockwise direction.
• To activate/deactivate the alarm, move the slide switch to the ON or OFF position.

Note
The time will remain within a few minutes of the correct time for a year. If there are sudden changes in the time display, replace the battery.

Technical Data

Hama GmbH & Co KG
86652 Monheim/Germany

Service & Support

www.hama.com

+49 9091 502-0

All listed brands are trademarks of the corresponding companies. Errors and omissions excepted, and subject to technical changes. Our general terms of delivery and payment are applied.