Tuner (Fm/Am); Hd Radio™ Reception - Yamaha RX-A2000 Owner's Manual

Tuner (FM/AM)

FM
Problem Cause
FM stereo reception
You are too far from the station
is noisy. transmitter, or the input from the
antenna is weak.
There is distortion, There is multi-path interference.
and clear reception
cannot be obtained
even with a good FM
antenna.
The desired station You are in an area far from a
cannot be tuned into
station, or input from the antenna
with the automatic
is weak.
tuning method.
"No Presets" is No preset stations are registered.
displayed.
"Wrong Station" is An invalid FM/AM frequency has
displayed. been input.
AM
Problem Cause
The desired station
The signal is weak, or the antenna
cannot be tuned into
connections are loose.
with the automatic
tuning method.
Automatic station
Automatic station preset is not
preset does not available for AM stations.
work.
See
Remedy
page
Check the antenna connections. 40
Switch to monaural mode. 65
Replace the outdoor antenna with a more —
sensitive multi-element antenna.
Adjust the antenna height or orientation, or —
place it in a different location.
Replace the outdoor antenna with a more —
sensitive multi element antenna.
TUN./CH H / I
Use to manually select the 63
station.
Register stations you want to listen to as 63
preset stations before operation.
Input a frequency that can be received. —
See
Remedy
page
Adjust the AM loop antenna orientation. —
Use the manual tuning method. 63
Use manual station preset. 63
Problem Cause
Continuous The supplied AM loop antenna is
crackling and not connected.
hissing noises are
The noises may be caused by
heard.
lightning, fluorescent lamps,
motors, thermostats, or other
electrical equipment.
Buzzing and whining A TV set is being used nearby.
noises are heard.
HD Radio™ Reception
Problem Cause
This unit cannot The radio station provides analog
receive the HD Radio FM/AM radio service only.
signals of the
The signal is too weak.
selected radio
station.
"Audio Mode" in the Option menu
is set to "Mono."
This unit cannot
The radio station provides one
select other audio
audio program only.
programs than the
main program.
HD Radio
The radio station does not provide
information does not the information.
appear.
There is no sound After an HD Radio station is
immediately after a received, about 5 seconds passes
station is received. before sound can be heard.
HD Radio The hold function is enabled.
information is not
displayed properly.
APPENDIX
Troubleshooting
See
Remedy
page
Connect the AM loop antenna correctly 40
even if you use an outdoor antenna.
It is difficult to completely eliminate noise, —
but it can be reduced by installing and
properly grounding an outdoor AM antenna.
Move this unit away from the TV set. —
See
Remedy
page
Select other radio stations that provides the 66
HD Radio service.
Adjust the antenna position. —
Use a high-quality FM/AM antenna. —
Set "Audio Mode" to "Auto." 69
—
—
—
Press HOLD to disable the hold function. 68
153
En