Changing Input Settings With A Single Key (Scene Function); Selecting A Scene Suited To An External Component - Yamaha RX-A2000 Owner's Manual

Changing input settings with a single key (SCENE function)

This unit has a SCENE function that allows you switch this unit on and change input sources, the settings of Audio Select, HDMI Output, Sound Program, Pure Direct Mode, Tone Control, Adaptive
DRC, and Compressed Music Enhancer with one key.

Selecting a SCENE suited to an external component

At initial factory settings, SCENE functions are configured for the following components.
Select a scene according to the component that will be used for playback.
1
BD/DVD TV
SCENE 1
Settings are configured for viewing DVD or Blu-ray Disc content. Press this key and play back content
from the DVD or Blu-ray Disc player connected to the AV1 jack on this unit.
SCENE 2
Settings are configured for viewing TV content. Press this key and turn on the TV connected to the
AUDIO1 jack on this unit.
Four scenes are available for different uses, such as playing movies or music. The following settings such as input sources, sound programs, and HDMI Output are provided at initial factory settings.
Settings that are not checked ( ) are not enabled when a scene key is pressed. Use "Load" in the Scene menu to check settings to be enabled. Refer to
for details (☞p. 103).
Audio HDMI
Input
Select Output
SCENE
✓ ✓
1 AV1 Auto OUT 1+2 Drama
(BD/DVD
Movie Viewing)
2 AUDIO1 Auto OUT 1+2 STRAIGHT Auto
(TV Viewing)
3 AUDIO2 Auto OUT 1+2 STRAIGHT Auto
(CD Music
Listening)
4 TUNER Auto OUT 1+2 STRAIGHT Auto
(Radio
Listening)
SCENE
2 3 4
CD RADIO
Sound Pure Direct Adaptive
Tone Control
Program Mode DRC
✓ ✓
Auto Bass: 0.0dB On
Treble: 0.0dB
Bass: 0.0dB On
Treble: 0.0dB
Bass: 0.0dB Off
Treble: 0.0dB
Bass: 0.0dB Off
Treble: 0.0dB
SCENE 3
Settings are configured for listening to CD content. Press this key and play back content from the CD
player connected to the AUDIO2 jack on this unit.
SCENE 4
Settings are configured for listening to a radio station. Press this key and tune into a radio station.
SCENE 5-12
The nothing is registered on the scenes at initial factory setting. The favorite settings can be registered on the
scenes and reloaded by using "Save" and "Load" in Scene menu. For details, refer to "Scene menu"
• When switching scenes, also change the external component that the remote control operates
• We recommend that selecting a scene and editing the SCENE function are performed in the Scene menu
(☞p. 102).
• This unit has eight additional scene functions. After selecting one of these scenes, one of the additional
eight scenes may also be selected
e
• Press and hold SCENE
Compressed CINEMA
Dialogue Extended
Music DSP 3D
Lift Surround
Enhancer Mode
Off On 0 Auto
On On 0 Auto
Off On 0 Auto
On On 0 Auto
PLAYBACK
(☞p. 103).
key for about three seconds to register the current setting to the scene.
"Adjusting settings registered with the SCENE function"
Video Video Master
Lipsync
Adjustment Processing Volume
Off Off -40.0dB Auto
Off Off -40.0dB Auto
Off Off -40.0dB Auto
Off Off -40.0dB Auto
(☞p. 103).
(☞p. 129).
Setting PEQ
Delay
Pattern Select
0ms Pattern1 Natural
0ms Pattern1 Natural
0ms Pattern1 Natural
0ms Pattern1 Natural
50
En