Quick Reference Guide; Preparing The Remote Control; External Components - Yamaha RX-A2000 Owner's Manual

Quick Reference Guide

■
Accessories
The following accessories are supplied with this product.
Remote control Simple remote
control
* The fi gure of the supplied power cable may differ depending upon regions.

Preparing the remote control

1
3
2 2
■
Items necessary for connection
Speakers
E.g.
Front speaker
• Use speakers with an impedance of at least 6 Ω. 4 Ω speakers can also be used as the front speakers. For more information on speaker
impedance, refer to page 3.
• If you are using a CRT monitor, we recommend that you use magnetically shielded speakers.
• Prepare at least two front speakers. The priority of the other speakers is as follows:
1 Two surround speakers
2 One center speaker
3 One (or two) surround back speaker (s)/presence speakers

External components

TV
Batteries (4) AM loop antenna
(AAA, R03, UM-4)
1
Take off the battery compartment cover.
2
Insert the four supplied AAA batteries
into the battery case, following the
polarity markings.
3
Snap the battery compartment cover
back into place.
E.g.
Center speaker
Playback device such as
BD (Blu-ray Disc)/DVD players
Indoor FM antenna
Be sure to aim the remote control directly at the remote
control sensor on this unit during operation.
within 20 feet (6 m)
E.g.
Surround speaker, surround back
speaker, and presence speaker
Cable
• Cables for connecting external components
(may differ depending on the components you are connecting)
• Speaker cables
(a quantity to match the number of speakers you are connecting)
• Audio pin cable
(for subwoofer)
- 1 -
English
for U.S.A.
YPAO microphone
Power cable
E.g.
Active subwoofer
✽