Registering Remote Control Codes - Yamaha RX-A2000 Owner's Manual

SOURCE RECEIVER
■

Registering remote control codes

for external component operations
The following section describes how to register remote
AV
d
1 2 3 4
control code using an example of the registration of the
5 6 7
V-AUX
remote control codes of a Yamaha BD player connected
AUDIO
1 2 3 4
to AV2 jack.
PHONO MULTI USB NET
• Perform each of the following steps within 30 seconds.
DOCK TUNER SIRIUS [ A ]
Settings will be automatically stopped if more than 30
seconds passes since the last operation. To reset, repeat
from step 2.
• Remote control code of an external component cannot
be set from the name or model number of a unit. Use
"Remote Control Code
search the available remote control codes from the
category or manufacturer of external components.
i
ENTER
• If multiple remote control codes exist, first set the first
code in the list, if it does not work then try the other
codes.
TV
INPUT
TV VOL TV CH
k
MUTE
CATEGORY
1 2 3
TUN./CH
4 5 6
v
7 8 9
0 ENT
J
B 1 : To control a TV independently from the input source using the
SETUP
k
TV control
control code for the TV. The
control the TV regardless of the selected input source.
1
2
Search" in the CD-ROM to
3
J
k
A
keys, press in step 4 and enter the remote
k
TV control keys can be used to
Use "Remote Control Code Search" in the CD-
ROM to search the available remote control
codes from the category or manufacturer of
external components.
"2064" can be used for a Yamaha BD player.
Press BSETUP.
"SETUP" appears in the display window on the remote
control.
SETUP
iCursor B / C
Press repeatedly to select
J2
"PRESET" and press iENTER.
The remote control enters the preset mode. "PRESET"
and name of the currently selected control area appears
in the display window alternately.
PRESET
v
2 : ENT can also be used for remote control settings as well as
i
ENTER.
Controlling the remote control to operate various functions
dAV2
4 Press to switch the input source to
J1
AV2.
Perform the following steps to register the selected
input source here to the remote control code.
AV 2
Press iENTER.
5
The current code setting appears.
5098
6 Enter a remote control code "2064" using
vNumeric
keys.
A remote control code can be entered using
i Cursor B / C / D / E.
2 0
SETUP
6 4
Continues to the
next page
131
En