Setting Sound Program Parameters (Sound Program Menu); Editing Sound Programs - Yamaha RX-A2000 Owner's Manual

Setting sound program parameters (Sound Program menu)

SOURCE RECEIVER
Sound effects can be adjusted from the Sound Program menu.
AV
1 2 3 4

Editing sound programs

5 6 7 V-AUX
AUDIO
1 2 3 4
Adjust sound field elements (sound program parameters)
PHONO MULTI USB NET
to achieve sound effects suited to the acoustics of audio/
DOCK TUNER SIRIUS [ A ]
video sources or rooms if you are not satisfied with the
results achieved with default sound program settings.
Follow the procedure described below to adjust sound
program parameters.
h
hON
Press
1
ON SCREEN
i
ENTER
iCursor B / C
2 Press
Program" and press iENTER.
RETURN
J
1 : An asterisk (*) appears on the left of the sound field parameter
name displayed on the TV when you change the parameter from
its default setting.
3
SCREEN.
to select "Sound
4
iCursor D / E
Use to select a sound
B.
program and press iCursor
Sound programs
iCursor B / C
Use to select a parameter
and press iENTER.
Sound program parameters
Settings
SETUP
iCursor B / C / D / E
5 Use to adjust the
parameter and press iRETURN.
When there are multiple parameters in the selected
sound program, repeat steps 4 and 5 to adjust other
parameters.
hON SCREEN
Press to close the Sound
6
Program menu.
■ To initialize sound program parameters
To set the parameters of the sound program back to
iCursor B / C
their default settings, use
to select "Reset" in step 4 and press iENTER.
When the following message is displayed, select
iENTER
"OK" and press to initialize.
To cancel initializing, select "CANCEL" and press
iENTER
when the message above is displayed.
En
J1
repeatedly
105