The Ruler Units - Xerox DocuMate 3220 User Manual

4. Click one of the icons to select a configuration.
The configuration settings appear as a list. Click the + (plus) sign to see the
full list. Click the - (minus) sign to collapse the list.
• Color scans the image in full color. Use this setting to scan color
photographs and other color images.
• Grayscale scans the image using up to 256 true shades of gray. Use
this setting to scan black and white photographs and other higher
quality black and white images. You can also scan a color photo with
this setting to turn its colors into grey shades.
• Black&White is for letters, memos, pen and ink drawings, and other
black and white material.
5. Click the Preview button.
If you want to preview a document before scanning from the ADF, make
sure only one page is loaded into the scanner.
6. Review the image to determine if adjustments are needed.
7. To adjust a setting, click the setting in the list on the left below the selected configuration.
A panel opens on the right side of the Advanced Interface for the selected setting. The next
section provides details about the options found in these side panels.
8. When you're satisfied with the image, click the Scan button.
When you're finished scanning items, click Done to close the Advanced Interface.
9.
10. The scanned images will appear in PaperPort, or other TWAIN application you're using.

The Ruler Units

The ruler around the edges of the image help you precisely position a custom sized image. You can
change the ruler units to suit the type of measurements you want.
Click the Ruler Units button.
The ruler units across the top and down the side of the window cycle through centimeters, inches, and
pixels.
134 Xerox DocuMate 3220
User's Guide