Vivotek IP8352 User Manual page 86

VIVOTEK
■ Event name: Enter a name for the event setting�
■ Enable this event: Select this option to enable the event setting�
■ Priority: Select the relative importance of this event (High, Normal, or Low)� Events with a higher
priority setting will be executed first.
■ Detect next event after
motion is detected�
Follow the steps 1~3 to arrange the three elements each by a mouse click on its blue text -- Schedule,
Trigger, and Action to set an event. A total of 3 event settings can be configured.
1� Schedule
Specify the period for the event to apply� Please select the days of the week and the time in a day (in 24-
hr time format) to specify when will the event-triggering conditions take effect�
2� Trigger
This is the cause or stimulus which defines what will trigger the event. The trigger source can be config-
ured to use the Network Camera's built-in motion detection mechanism or external digital inputs�
There are several choices of trigger sources as shown on next page� Select each item to display its
related options�
■ Video motion detection
This option makes use of the built-in motion detection mechanism as a trigger source� To enable this
function, you need to configure a Motion Detection Window first. For more information, please refer to
Motion Detection on page 98 for details�
■ Periodically
This option allows the Network Camera to trigger periodically for every other defined minute. Up to 999
minutes are allowed�
■ Digital input
This option allows the Network Camera to use an external digital input device or sensor as a trigger
source� Depending on your application, there are many choices with digital input devices on the market
which help detect changes in temperature, vibration, sound, light, etc�
■ System boot
This option triggers the Network Camera when the power to the Network Camera is disconnected�
■ Recording notify
This option allows the Network Camera to trigger when the recording disk is full or when recording
starts to overwrite older data�
86 - User's Manual
seconds: Enter the duration in seconds to pause motion detection after a