Table of Contents
Advertisement
You can click Preview to fine-tune the image, or click Restore to recall the original settings without
incorporating the changes� When completed with the settings on this page, click Save to enable the
settings�
If you want to configure another sensor setting for day/night/schedule mode, please click Profile to open
the Profile settings page as shown below.
Please follow the steps below to setup a profile:
1� Check Enable and apply this profile�
2� Select the applied mode: Day mode, Night mode, or Schedule mode� Please manually enter a range
of time through which you want the Schedule mode to apply�
3. Configure Exposure control settings in the folowing columns� Please refer to the previous page for
detailed information�
4� Click Save to enable the setting and click Close to exit the page�
2011/03/13 17:08:56
VIVOTEK
User's Manual - 75
Advertisement
Table of Contents
