Vivotek IP8352 User Manual page 168

VIVOTEK
8.14 ePTZ Preset Locations
Note: This request requires Operator privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/operator/ePreset.cgi?channel=<value>&stream=<value>
[&addpos=<value>][&delpos=<value>][&return=<return page>]
PARAMETER VALUE
channel <0~(n-1)>
stream <0~(m-1)>
addpos <Text string less than
40 characters>
delpos <Text string less than
40 characters>
return <return page>
8.15 IP Filtering
Note: This request requires Administrator access privileges.
Method: GET/POST
Syntax: <product dependent>
http://<servername>/cgi-bin/admin/ipfilter.cgi?type[=<value>]
http://<servername>/cgi-bin/admin/ipfilter.cgi?method=add<v4/v6>&ip=<ipaddress>[&index=<value>]
[&return=<return page>]
http://<servername>/cgi-bin/admin/ipfilter.cgi?method=del<v4/v6>&index=<value>[&return=<return
page>]
PARAMETER VALUE
type NULL
allow, deny
method addv4
168 - User's Manual
path according to the current path. If you omit this parameter, it
will redirect to an empty page.
(capability.eptz > 0)
DESCRIPTION
Channel of the video source.
Stream.
Add one preset location to the preset list.
Delete preset location from the preset list.
Redirect to the page <return page> after the parameter is
assigned. The <return page> can be a full URL path or relative
path according to the current path.
DESCRIPTION
Get IP filter type
Set IP filter type
Add IPv4 address into access list.