Vivotek IP8352 User Manual page 163

http://myserver/cgi-bin/viewer/camctrl.cgi?channel=0&camid=1&x=300&y=200&resolution=704x480&vi
deosize=704x480&strech=1
PARAMETER VALUE
channel <0~(n-1)>
camid 0,<positive integer>
move home
up
down
left
right
speedpan -5 ~ 5
speedtilt -5 ~ 5
speedzoom -5 ~ 5
speedfocus -5 ~ 5
speedapp -5 ~ 5
auto pan
patrol
stop
zoom wide
tele
stop
zooming wide or tele
zs 0 ~ 6
0 ~ 15 <SD81X1>
vx <integer , excluding 0> The slope of movement = vy/vx, used for joystick control.
vy <integer>
vs 0 ~ 7
0 ~ 15 <SD81X1>
x <integer>
y <integer>
DESCRIPTION
Channel of video source.
Camera ID.
Move to camera to home position.
Move camera up.
Move camera down.
Move camera left.
Move camera right.
Set the pan speed.
Set the tilt speed.
Set the zoom speed.
Set the focus speed.
Set the auto pan/patrol speed.
Auto pan.
Auto patrol.
Stop camera.
Zoom larger view with current speed.
Zoom further with current speed.
Stop zoom.
Zoom without stopping for larger view or further view with zs
speed, used for joystick control.
Set the speed of zooming, "0" means stop.
Set the speed of movement, "0" means stop.
x-coordinate clicked by user.
It will be the x-coordinate of center after movement.
y-coordinate clicked by user.
It will be the y-coordinate of center after movement.
VIVOTEK
User's Manual - 163