Table of Contents
Advertisement
7.6 network
Group: network
NAME
VALUE
preproces
<positive
s
integer>
type
lan,
pppoe
<product
dependent>
resetip
<boolean>
ipaddress
<ip
address>
subnet
<ip
address>
router
<ip
address>
dns1
<ip
address>
dns2
<ip
address>
SECURITY
DESCRIPTION
(get/set)
7/6
An 32-bit integer, each bit can be set separately as follows:
Bit 0 => HTTP service;
Bit 1=> HTTPS service;
Bit 2=> FTP service;
Bit 3 => Two way audio and RTSP Streaming service;
To stop service before changing its port settings. It's
recommended to set this parameter when change a service
port to the port occupied by another service currently.
Otherwise, the service may fail.
Stopped service will auto-start after changing port settings.
Ex:
Change HTTP port from 80 to 5556, and change RTP port for
video from 5556 to 20480.
Then, set preprocess=9 to stop both service first.
"/cgi-bin/admin/setparam.cgi?
network_preprocess=9&network_http_port=5556&
network_rtp_videoport=20480"
6/6
Network connection type.
6/6
1 => Get ipaddress, subnet, router, dns1, dns2 from DHCP
server at next reboot.
0 => Use preset ipaddress, subnet, rounter, dns1, and dns2.
6/6
IP address of server.
6/6
Subnet mask.
6/6
Default gateway.
6/6
Primary DNS server.
6/6
Secondary DNS server.
VIVOTEK
User's Manual - 121
Advertisement
Table of Contents
