Vivotek IP8352 User Manual page 140

VIVOTEK
focusspeed
patrolseq
patroldwelling
preset_i<0~(npreset-1
)>_name
preset_i<0~(npreset-1
)>_ dwelling
uart
cameraid
isptz
disablemdonptz
7.24 UART control
Group: uart (capability.nuart > 0)
NAME
ptzdrivers_i<0~19,
127>_name
ptzdrivers_i<0~19,
127>_location
enablehttptunnel
Group: uart_i<0~(n-1)> n is uart port count
NAME
baudrate
databit
140 - User's Manual
-5 ~ 5 1/4
string[64] 1/4
string[128] 1/4
string[40] 1/4
0 ~ 999 1/4
0 ~ (m-1), m 1/4
is UART count
0~255 1/4
0 ~ 2 1/4
<boolean> 1/4
VALUE SECURITY
(get/set)
string[40] 1/4
string[128] 1/4
<boolean> 4/4
(capability.nuart > 0)
VALUE SECURITY
(get/set)
110,300,600,120 4/4
0,2400,3600,480
0,7200,9600,192
00,38400,57600,
115200
5,6,7,8 4/4
6,7,8
Auto focus speed
(For external device)
The indexes of patrol points, separated by ","
(For external device)
The dwelling time of each patrol point,
separated by ","
Name of the preset location.
The dwelling time of each preset location
Select corresponding uart
(capability.nuart>0).
Camera ID controlling external PTZ camera.
0: disable PTZ commands.
1: enable PTZ commands with PTZ driver.
2: enable PTZ commands with UART tunnel.
Disable motion detection on PTZ operation.
DESCRIPTION
Name of the PTZ driver.
Full path of the PTZ driver.
Enable HTTP tunnel channel to control UART.
DESCRIPTION
Set baud rate of COM port.
Data bits in a character frame.