Hettich MIKRO 2.0 Quick Start Manual

Quick-Start Guide
MIKRO 2.0 | 2.0R
This Quick-Start Guide only serves as a reference for the initial set up of the machine covering the most important functions and opera-
ting steps. It does not replace the full operating instructions. Please read the manual, including all safety instructions before use.
Initial Setup
1. Switch on the device.
HETTICH ZUBEHÖR
EINHAND-BÜGELVERSCHLUSS
4. To open the lid of the centrifuge press
.
7. Functions of the TURN/PUSH button.
Select and confirm.
a.
8. a. To open the sub menu press
b. To select P5 to P8, hold
select your program button.
a.
b.
Andreas Hettich GmbH & Co. KG | Föhrenstr. 12 | 78532 Tuttlingen | info@hettichlab.com | Phone: +49 7461 705-0
2. Remove the transport protection from
the rotor.
5. Install the rotor vertically.
7. a. Turn = adjust parameters.
b.
9. To switch between the Quick-Adjust
.
and Program windows press
and
To close notifications and go back,
press
a.
.
.
3. Place the rotor lid vertically onto the ro-
tor and push down firmly. The removal
aid and unlocking pin must be flush.
6. To close the lid, press the front edge
of the lid down slightly.
1 sec.
7. b. Press = confirm parameter value
and/or navigate to the next parameter.
10. Press to start centrifugation.
www.hettichlab.com
b.