VIVOTEK - A Leading Provider of Multimedia Communication Solutions
daylight_enable
<boolean>
daylight_dstactual
<boolean>
mode
daylight_auto_beg
string[19]
intime
daylight_auto_end
string[19]
time
daylight_timezone
string
s
updateinterval
0,
3600,
86400,
604800,
2592000
restore
0,
<positive integer>
reset
0,
<positive integer>
restoreexceptnet
<Any value>
96 - User's Manual
260: GMT 06:30 Rangoon
280: GMT 07:00 Bangkok, Hanoi, Jakarta,
Krasnoyarsk
320: GMT 08:00 Beijing, Chongging, Hong
Kong, Kuala Lumpur, Singapore, Taipei
360: GMT 09:00 Osaka, Sapporo, Tokyo,
Seoul, Yakutsk
380: GMT 09:30 Adelaide, Darwin
400: GMT 10:00 Brisbane, Canberra,
Melbourne, Sydney, Guam, Vladivostok
440: GMT 11:00 Magadan, Solomon Is., New
Caledonia
480: GMT 12:00 Aucklan, Wellington, Fiji,
Kamchatka, Marshall Is.
520: GMT 13:00 Nuku'Alofa
6/6
Enable
automatic
zone.
6/7
Check if current time is under daylight saving
time.
(Used internally)
6/7
Display the current daylight saving start time.
(product dependent)
6/7
Display the current daylight saving end time.
(product dependent)
6/6
List time zone index which support daylight
saving time.
6/6
0 to Disable automatic time adjustment,
otherwise, it indicates the seconds between
NTP automatic update intervals.
7/6
Restore the system parameters to default
values after <value> seconds.
7/6
Restart the server after <value> seconds if
<value> is non-negative.
7/6
Restore the system parameters to default
values except (ipaddress, subnet, router,
dns1, dns2, pppoe).
This command can cooperate with other
"restoreexceptXYZ" commands. When
daylight saving time in time