Completion - Vivotek FD7141 User Manual

To adjust the zoom factor and focus range
1. Loosen the zoom controller, then adjust the zoom factor by moving the controller left and right.
Upon completion, tighten the zoom controller.
2� Loosen the focus controller, then adjust the focus range by moving the controller left and right�
Upon completion, tighten the focus controller�
Note
If you are using FD7141V (f= 9~22 mm), please hold the supplied plastic cover in front of the
lens while adjusting the focus controller as shown below�

Completion

Attach the dome cover to camera� Secure the three dome screws with a screwdriver� Finally,
make sure all parts of the camera are securely installed�
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
Loosen
Tighten
DO NOT over tighten the controllers�
Doing so will damage the camera
lens module�
axis of the lens
W
T
N
User's Manual - 15