DeFelsko PosiTector DPM Instruction Manual page 9

Emissivity
Sets the emissivity ratio for the PosiTector DPM IR infrared
temperature sensor.
Select from a User Entered Value or one of the following preset
options:
- Aluminum (rough) = 0.07 - Plastics = 0.94
- Zinc (Galvanized) = 0.25
- Concrete = 0.54
- Paint = 0.96
The PosiTector DPM has internal memory storage for
recording measurement datasets. Stored datasets can be
reviewed on-screen or accessed via computers, tablets and
smart phones. Datasets are date and time-stamped. Datasets
can be stored manually (using the
using the Auto Log mode.
The symbol appears when the Gage is set to store datasets.
Standard models store up to 2,500 datasets in one batch.
Advanced models store 250,000 datasets in up to 1,000
batches. "New Batch" closes any open batch and creates a new
batch name using the lowest available number. New batch
names are date stamped when they are created.
Scroll through display
modes (Advanced only)
Delete last reading
Access the Menu
Screen Capture
Press both
of the current display. The last 100 screen captures are stored
in memory and can be accessed when connected to a
computer (see PosiSoft USB Drive pg. 9).
(PosiTector DPM IR Models Only)
Memory Management
and buttons simultaneously to save an image
- Steel (Oxidized) = 0.95
- Wood = 0.95
button), or automatically
7
Create a new batch
(Advanced only)
Restore brightness
after dimming