DeFelsko PosiTector DPM Instruction Manual page 10

The PosiTector DPM can automatically display and record da-
tasets at user selected time intervals. When selected, the Auto
Log icon
until the next reading. Connect the instrument to a USB power
source for long-term use.
Turn on instrument/
Cancel Auto Log
mode
NOTES:
-Auto Log continues recording until the instrument loses power
or the user turns off Auto Log mode. Stored datasets will remain
in memory until full, then the oldest dataset or batch will be over-
written to allow space for the next dataset.
-To conserve battery life, readings update only at the Log Interval.
The last recorded readings will remain on the display until the
next dataset has been stored.
-It is recommended that fresh alkaline batteries be installed prior
to an extended Auto Log if not connected to continuous power.
Auto Log Mode
will appear on the display, with a countdown timer
8
Scroll through
display modes
(Advanced only)