DeFelsko PosiTector DPM Instruction Manual page 13

If Bluetooth is disabled or disconnected, data from
batches selected in the Sync Batches menu are held in a
queue until communication with the PosiTector App is re-
established.
Send Batches
Transfers selected batches to the PosiTector App. Send
Batches is useful when switching between devices, as only
readings and batches that have yet to be synchronized with any
smart device are synchronized automatically.
The Send Batches option is visible in the menu when the Gage
is connected to a smart device running the PosiTector App.
Keyboard
When enabled and connected to a computer, the PosiTector
will be recognized as a wireless Keyboard. Readings are sent
to the computer as they are taken, emulating keystrokes,
followed by a carriage return.
NOTE:
Keyboard is located in the Bluetooth Setup menu.
Input Devices
Allows Bluetooth Devices such as barcode scanners and
keyboards to be paired with the PosiTector for annotating
batches and readings.
NOTE:
Input Devices is located in Bluetooth Setup menu.
Bluetooth Classic
Allows individual readings to be sent to a computer, printer or
compatible device as they are taken using Bluetooth Classic
wireless technology. See www.defelsko.com/bluetooth
Updates
Determines if a software update is available for your Gage.
See www.defelsko.com/update
WARNING:
date (see pg. 4).
(Advanced models only)
(Advanced models only)
(Advanced models only)
The Gage will perform a Hard Reset after an up-
11