NovaStar MCTRL700 Pro Quick Start Manual page 8

Step 1 Ensure that the light sensor is connected to the controller.
Step 2 On the menu bar, choose User > Advanced Synchronous System User Login. Enter the password and click
Login.
The default password is "admin".
Step 3 Click or choose Settings > Brightness on the menu bar.
Step 4 Select Auto Adjustment.
Step 5 Click Wizard Settings > Light Sensor Configuration to set up the light sensor information.
1.
Click Light Sensor Test to test the light sensors connected to the control system.
2.
(Optional) Select When the light sensor fails, the brightness should be adjusted to and set a brightness
value.
If this option is not selected, the screen brightness will keep the last updated brightness value when
the light sensor fails.
3.
Click or
4.
Fast section division can equally divide the ambient brightness range and screen brightness range into
the specified number of segments.
www.novastar.tech
, or click Fast Section Division to set the brightness mapping table.
MCTRL700 Pro LED Display Controller
Quick Start Guide
6