signia Motion SX primax, Motion SA primax, Motion P primax User Manual page 13

On the phone
When you are on the phone, hold
the telephone receiver slightly above
your ear. The hearing instrument and
telephone receiver have to be aligned.
Turn the receiver slightly so that the ear
is not completely covered.
Telephone program
You may prefer a certain volume when using the phone.
Ask your Hearing Care Professional to configure a
telephone program.
Switch to the telephone program whenever you are on
X
the phone or use the automatic program switch.
If a telephone program or the automatic program
switch are configured for your hearing instruments, it is
listed in section "Settings".
24
Automatic program switch
(AutoPhone or TwinPhone)
Your hearing instrument can automatically select
the telephone program when you bring the telephone
handset close to the hearing instrument. TwinPhone even
transmits the call into both ears. When you are finished
speaking on the phone, move the handset away from the
hearing instrument and microphone mode will re-engage.
If you want to use this function, ask your Hearing Care
Professional to do the following:
●
Activate the AutoPhone or the TwinPhone function.
●
Check the telephone receiver's magnetic field.
For the automatic program switch, your hearing
instrument detects the telephone receiver's magnetic
field. Not all telephones produce a magnetic field
strong enough to activate this function. In this case,
you can use the AutoPhone magnet, which is available
as an accessory, and attach it to the telephone
receiver.
See the AutoPhone magnet user guide for instructions on
how to position the magnet.
NOTICE
Use the approved AutoPhone magnet only. Ask
your Hearing Care Professional for this accessory.
25