Table of Contents
Advertisement
Using Flash Mode
Flash mode provides an alternate way to manage your calls while one or more calls are
active. For example, you can dial another call, swap between calls, or join two calls in a
conference session with the press of a button while in Flash mode.
1.
Press Talk
2.
If the Do you want to switch to Flash mode? prompt appears,
select Yes.
3.
While in Flash mode, do any of the following:
If you have one call in progress and you answer an
incoming second call, press Talk
calls.
If you have one call in progress, to make an outgoing
second call, dial the number using any of the methods described in "Making Calls"
on page 57.
If you have one call in progress and you place an outgoing second call, press
Talk
after establishing a connection with the second party to set up a
conference session using three-way calling.
If you have two calls in conference, press Talk
can then dial another number and include the new caller in the conference
session.
Note:
4.
To exit Flash mode and end all the calls, press Power/End
Section 2B: Phone Features
from Active Call view.
Pressing Talk during a conference call usually hangs up the second call.
However, depending on your network connection, you may occasionally
hang up the first call.
to swap between the
to hang up one of the calls; you
.
73
Advertisement
Table of Contents
