Edit SIP profiles
Select
Menu
Control panel
>
Connection
SIP
>
Select
Options
>
Profile name
•
Service profile
•
Default destination
•
use for the internet connection.
Default access point
•
use for the internet connection.
Public user name
•
provided by your service provider.
Use compression
•
Registration
— Select the registration mode.
•
Use security
— Select if security negotiation is
•
used.
Proxy server
— Enter the proxy server settings for
•
this SIP profile.
Registrar server
•
settings for this SIP profile.
Edit SIP proxy servers
Select
Options
>
server.
Proxy servers are intermediate servers between a
browsing service and its users used by some service
providers. These servers may provide additional
security and speed up access to the service.
Select from the following:
© 200 9 Nokia. All rights reserved.
Settings
>
settings.
Edit
and from the following:
— Enter a name for the SIP profile.
— Select
IETF
or
Nokia
— Select the destination to
— Select the access point to
— Enter your user name
— Select if compression is used.
— Enter the registration server
New SIP profile
or
Edit
Proxy server address
•
address of the proxy server in use.
and
Realm
•
User name
•
and password for the proxy server.
Allow loose routing
•
allowed.
3GPP.
Transport type
•
Port
— Enter the port number of the proxy server.
•
Edit registration servers
Select
Options
server.
Select from the following:
Registrar server address
•
or IP address of the registrar server in use.
Realm
•
User name
•
and password for the registrar server.
Transport type
•
Port
— Enter the port number of the registrar
•
server.
Proxy
>
Configuration settings
Select
Menu
Connection
You can receive messages from your service provider
or company information management containing
configuration settings for trusted servers. These
— Enter the host name or IP
— Enter the proxy server realm.
and
Password
— Enter your user name
— Select if loose routing is
— Select UDP, Automatic, or TCP.
New SIP profile
or
>
— Enter the host name
— Enter the registrar server realm.
and
Password
— Enter your user name
— Select UDP, Automatic, or TCP.
Control panel
Settings
>
>
> Configurations.
Edit
Registrar
>
and
161